Skip to content

60 minute timer

A 60 minute timer for the classroom: it opens at 1:00:00, counts down to zero and rings a bell. Show it full screen or on the board. One hour covers a full practice paper or a whole lesson, and the timer is free with a teacher sign-in.

Sign in free to start a 60 minute timerSee an example

Sign in to use the Timer

Free for teachers. One account opens every tool and keeps your work.

Sign in free

Timer

1:00:00

StartReset

The timer opened on this page's preset at 1:00:00, hours, minutes and seconds, with the full bar beneath, bell 1 at zero, one round and no flash. The engine draws it before Start.

Key facts

on the face; at an hour or more it shows hours
1:00:00
in the hour
3,600 s
in the warning colour, a tenth of the time
Last 6:00
for three hour-long rounds
3:00:00

How it works

  1. Sign in. The timer reads 1:00:00 with the bar under the digits.
  2. Press Full screen. Keep the screen awake is ticked, where the browser offers it, so the laptop does not dim during the hour.
  3. Press Start as the paper or the lesson begins.
  4. Bell 1 rings at 00:00 and Time is up shows. Reset brings back 1:00:00.

Examples

  • A full mock paper

    Bina's Year 11 sit a one hour science paper in the hall. The hour runs on the projector at the front, and at 06:00 the bar changes colour as the last-checks signal.

  • An hour of coursework

    Carlos books the computer room for a lesson of coursework. He starts the hour as the class sits down at the computers, so the bar shows how much of the session is left.

  • Three one-hour shifts

    On a school trip day, Dev sets Repeat to 3 for three activity groups. A bell every hour moves them on, and the last one rings after 3:00:00.

Ways teachers use it

  • Full practice papers

    Many school papers are an hour long. The same timer on the projector each time lets pupils learn how an hour of writing feels and how fast the bar falls.

  • A 60 minute visual timer

    The bar display, set by this page, is the visual part: it empties across the hour, a sixtieth each minute, and the colour changes for the last 6 minutes. Switch Display to Ring for a circle instead.

  • A 60 minute countdown for a lesson

    Keep the hour on the board and plan around what it reads: starter until 50:00, main task until 15:00, plenary to the bell. The class can see the plan move.

  • Reading for an hour

    Older classes doing a long read or an independent study hour can work without asking for the time. The bell marks the end for everyone at once.

Inputs, outputs and limits

What you put in
  • The time: 60 in minutes and 0 in seconds under Custom; the fields keep minutes, so it stays 60, not 1:00
  • Quick buttons 1, 5, 10 and 15 minutes
  • Repeat: 1 to 20 hour-long rounds
  • Display: Digits, Bar or Ring; Size: Small, Medium or Large
  • Sound: bell 1 or another of the 20, or none
What you get
  • A count from 1:00:00 down to 00:00 on the page, full screen or on the board
  • Bell 1 at zero for each round
  • Time is up when the run is over
Limits
  • Times from 0:01 to 999:59, which the face shows as 16:39:59
  • 20 rounds at most; 3 rounds take 3:00:00
  • The warning colour covers the last 6:00
What is kept
  • On this page the hour runs in the tab and nothing is saved
  • On the board, the timer is saved in your account with the screen

How the hour shows on the face

At an hour or more, the timer adds hours to the face. So the 60 minute timer reads 1:00:00 when it opens and for the first second after Start, then 59:59, and from there it shows minutes and seconds to the end. The digits are sized to fit seven characters across while the hour shows, and may grow once only five are left.

Checkpoints in a 60 minute run
The face readsTime goneBar left
1:00:00NoneFull
59:591 secondFull, less a sliver
45:0015 minutes75 percent
30:00Half an hourHalf
15:0045 minutes25 percent
06:0054 minutes10 percent, warning colour
00:00The hourEmpty, bell 1 rings

A countdown, not a stopwatch

A 1 hour stopwatch or a 60 minute stopwatch counts up and does not ring. This timer counts the hour down and rings at the end. For timing how long something takes, with laps, use the Stopwatch.

Questions teachers ask

Do I need an account?

Yes. The timer needs a free teacher account. Sign in once on each device with Google, Microsoft or a code sent to your email, and the hour is already set when the timer opens.

How do I set a 60 minute timer by hand?

Under Custom, type 60 in min and 0 in s. There is no hours field and no 60 minute button; minutes go up to 999.

Is this a 1 hour online timer?

Yes. It is a 1 hour countdown timer in the browser, on this page or on OpenEduCat Board. After the first sign-in on a device, the board's timer and its bells keep working offline.

Will the 60 minute timer keep time if the laptop sleeps?

Yes. It counts against the clock, so it shows the right time when the screen wakes. If the end passed during sleep, the bell rings once on waking, so keep the screen awake for an hour-long run.

Can I stop the 60 minute timer from ringing?

Yes. Untick Bell at zero, or pick another of the 20 bells in Settings.

More ready-made versions

Each one opens the tool already set up after you sign in.

On OpenEduCat Board, this timer sits on the projector next to a name picker, groups and a sound meter.

Free account. Sign in once on each device. The board then works offline. Your timer here is on the board too.

Open the board

Ways teachers use it: Brain breaks, Active learning, Learning stations

Running a whole school? OpenEduCat for schools runs it in one system.

See OpenEduCat for schools
  • No student accounts.
  • No ads.
  • Data-processing agreement on request.
For schools

Was this useful?

Counted per page. Report a problem for bugs.