Skip to content

10 minute timer

A 10 minute timer for teachers. It opens at 10:00, counts down on the projector and rings a bell at zero. Use it for a starter task, a short test or a break between two halves of a lesson; it repeats up to 20 rounds and is free with a teacher sign-in.

Sign in free to run 10 minutesSee an example

Sign in to use the Timer

Free for teachers. One account opens every tool and keeps your work.

Sign in free

Timer

10:00

StartReset

What the page draws from its own settings: the timer at 10:00 with the bar display, full and waiting for Start. Each minute takes away one tenth of the bar.

Key facts

from 10:00 down to 0:00
600 seconds
of warning colour at the end
1 minute
sets 10 minutes on a focused board timer
Key 0
for 3 rounds with Repeat
30:00

How it works

  1. Sign in and the timer is already at 10:00. If you changed it, the 10 min button brings it back.
  2. Choose Full screen, or Open on the board to keep it beside your slides.
  3. Press Start. On the board, Enter does the same and key 0 sets 10 minutes again.
  4. Bell 1 rings at 0:00. Press +1 min if the class needs a little longer.

Examples

  • Do now on the board as they walk in

    Three recall questions from last week on the slide, 10:00 underneath. You greet the class at the door and take the register while the bar runs.

  • A times tables check

    Forty questions, ten minutes, no talking. When the bell rings, pens down and swap books to mark.

  • Plenary before the bell

    Start it when the school day has ten minutes left. Exit slips, packing up and chairs on tables are done before the building's own bell goes.

Ways teachers use it

  • Starter tasks that do not drift

    A starter is meant to warm the class up, not eat the lesson. A visible 10:00 keeps it to its slot, and the warning colour at 1:00 tells you to collect answers.

  • Short assessments

    Mental maths, a vocabulary check or a quick map test fit well into ten minutes. Everyone sees the same time, so nobody can say they were not told.

  • Movement and screen breaks

    Between two long tasks, ten minutes outside or at the back of the classroom resets attention. The bell calls everyone back to their seats.

  • Splitting a period into blocks

    Set Repeat to 4 and a 40 minute period becomes four 10 minute blocks: teach, try, practise, review. Round 2 of 4 shows under the bar so you know where you are.

Inputs, outputs and limits

What you put in
  • A start of 10:00 from this page, or the 10 min button, one of four quick buttons beside 1, 5 and 15 min
  • Custom minutes and seconds for any other time
  • Bell at zero: one of 20 bells or none, with a volume slider
  • Repeat from 1 to 20 rounds
  • Digits, bar or ring display in three sizes
What you get
  • A 10 minute countdown, full screen or on the board
  • Time is up on the face and a bell at the end of every round
Limits
  • The shortest time is 0:01 and the longest is 999:59
  • 20 rounds of 10 minutes is the most: 3 hours 20 minutes
  • The warning colour covers the last 10 percent, here one minute
What is kept
  • This page saves nothing; close the tab and the timer is gone
  • On the board the timer is kept with the screen in your account

Ten minutes in ten steps

10 minutes is 600 seconds, and each minute removes exactly one tenth of the bar. That makes the bar easy to read aloud: 'seven tenths left' is seven minutes. The warning colour arrives with the final tenth, at 1:00, so the last step of the bar is a different colour from the other nine.

Ways to fit 10 minute rounds into one lesson
RepeatTotal timeFits a
110:00Starter or plenary
330:00Half a 60 minute lesson
440:0040 minute period
61:00:00One hour, a bell every 10 minutes

If you searched for a 10 min stopwatch

Most people who type that want a clock that stops them after ten minutes, which is a countdown. This one counts down and rings. If you want to measure how long something takes, counting up, use the Stopwatch tool instead.

Questions teachers ask

Do I need an account?

Yes. The timer needs a free teacher account. Sign in once on each device with Google, Microsoft or a code sent to your email, and it opens set to 10 minutes.

How is this different from a Google 10 minute timer?

Both count down 10 minutes. This one is sized for a projector, has a bar or ring for younger pupils, 20 bells, and Repeat for several rounds in a row.

Will the 10 minute timer keep time if the laptop sleeps?

Yes. The end time is fixed when you press Start, so a laptop that dozes off wakes up showing the correct time left.

Can I stop the 10 minute timer from ringing?

Yes. Untick Bell at zero and it ends quietly with Time is up on the face, or choose another bell from the 20.

Can I use it as a 10 minute countdown clock before an event?

Yes, for anything up to 999 minutes away. For a countdown to a date, such as the last day of term, the Countdown to event tool is the better fit.

More ready-made versions

Each one opens the tool already set up after you sign in.

On OpenEduCat Board, this timer sits on the projector next to a name picker, groups and a sound meter.

Free account. Sign in once on each device. The board then works offline. Your timer here is on the board too.

Open the board

Ways teachers use it: Brain breaks, Active learning, Learning stations

Running a whole school? OpenEduCat for schools runs it in one system.

See OpenEduCat for schools
  • No student accounts.
  • No ads.
  • Data-processing agreement on request.
For schools

Was this useful?

Counted per page. Report a problem for bugs.